DO NOT MISS
>>Follow our Facebook page for updates! >>Join our Craftwell Design Team: Apply Now!

November 23, 2015

DIY Butterfly Ornament

Cut 'n' Boss Design Team: Mitsyana Wright Cycle 12


Hello, Crafty Friends!! It the holiday season and it's time to get those crafty gifts going. Today I have a beautiful butterfly ornament to share. It doesn't only serve as tree decor but as a gorgeous keepsake too.

Supplies Used
Cut'.n'boss (Craftwell)
Teresa Collins Pocket Dies- TodayThankful (Craftwell)
eBrush (Craftwell)
Sharpie Markers- Green & Lime Greem
Spectrum Noir Markers- CG3, GB1, GB2, TN3
Acrylic Ornament
Hemp Twine
Cardstock- White & Green
PITT Artist Pen B (Faber-Castell)
Gesso (Liquitex)
3D Lacquer 
Iridescent Shreds (Optional)



I started off by using my stem and small leaf die from the Teresa Collins Thankful Pocket Die set to cut out white and green cardstock. I usually try to cut out more die cuts than I need... just in case I have an accident or two (or three). LOL

To cut wafer dies I used the following sandwich combination in my Cut'n'boss machine:

From Bottom to Top
D PLATE
A PLATE
B PLATE
DIE
PAPER
A PLATE




Then I added some shading with the help of my ebrush machine and markers. With tiny pieces like these shading and coloring can be difficult. sponging and inking can run the risk of damaging your die cuts. With the ebrush the color sprays on and virtually eliminates the need for vigorous rubbing.

I ebrushed my green leaves with a lime green and regular green sharpie. And my stems in a lime green sharpie then Spectrum Noir markers in CG3 and TN3.



Then I ran my leaves and stem through my 3" Xyron Sticker Maker... turning my pieces into stickers.



Then arranged them onto my ornament... concentrating on the bottom and top of the ornament. I used 6 leaves for the entire top and 8 leaves for the entire bottom. And used 4 stems on the top and 4 stems on the bottom.



I cut out two butterflies for the Teresa Collins Today Pocket Dies set. ebrushed them in Spectrum Noir GB1 and GB2 and hand drew the details with a PITT Artist Pen (B) and used gesso and a toothpick to add the small white dots.



After they were done drying, I ran them through my 3" Xyron Sticker Maker and applied the onto each other. These butterflies are symmetrical and if flipped mirror itself perfectly. Now my butterfly is double-sided. 

I gently curl my butterfly's wing in and pass it through the hole of the ornament. Once the butterfly is inside you can open/ widen the wings by gently pushing on them with a chopstick or paintbrush. Add shreds if desired.

I wrapped twine around neck of the ornament and glued on a bow I made with even more hemp twine.

And here is my finished ornament...



I hope you enjoyed today's project.

And Happy Holiday Crafting!!

~Mitsy



For more inspirational projects please visit my personal blog at:

3 comments :

  1. Holy macaroni! This is so darn beautiful. I am so casing this beauty!

    ReplyDelete
  2. I gently curl my butterfly's wing in and pass it through the hole of the ornament. Once the butterfly is inside you can open/ widen the wings by gently pushing on them with a chopstick or paintbrush. Add shreds if desired.
    Facebook Links

    ReplyDelete

 
Copyright © 2014 Craftwell Blog. Designed by OddThemes - Published By Gooyaabi Templates